recurso grafico

Rechtlicher Hinweise

Metalcam, S.L., provided by CIF B59687939, acts as the owner, promoter and content manager of this Web. Metalcam, S.L. informs the Users that it complies with the current data protection regulations, and in particular, with Regulation (EU) 2016/679 of the European Parliament and the Council of 27 April 2016 on the protection of natural persons for which deals with the processing of personal data and the free movement of these data and repealing Directive 95/46 / EC (General Regulation for data protection) and with the Law of the Society of Information Services and Electronic Commerce, Law 34/2002, of July 11

Social Responsibility Report

Concept of user

The use of the Website (including its private area) attributes the status of User, and implies the full and unreserved acceptance of each and every one of the provisions included in this Legal Notice and in the Privacy Policies in the version published by Metalcam, S.L. at the same time as the User accesses the web. Consequently, the User must read carefully the present Legal Notice and the Privacy Policies on each of the occasions in which it proposes to use the Web, since it may have modifications.

Information about the links

Metalcam, S.L. is not responsible for the non-own websites that can be accessed through "links" or any content made available by third parties.

Any use of a link or access to a non-proprietary web site is carried out at the sole risk and risk of the user and Metalcam, S.L. does not recommend or guarantee any information obtained through a link other people's to the web of Metalcam, S.L. nor is it liable for any loss, claim or damage derived from the use or misuse of a link, or of the information obtained through it, including other links or websites, of interruption in the service or in the service, access, or the attempt to use or misuse a link, both when connecting to the Web of Metalcam, S.L. as well as accessing the information on other websites from the Metalcam, S.L. website.

Links from other external Websites

It is expressly prohibited to establish the www.metalcam.com link from pages that contain racist, xenophobic, pornographic, or anti-terrorist, racist, anti-human rights or any other illegal or anti-moral nature and to public order. In no case may it be understood, nor declare that Metalcam, S.L. intervenes, endorses, promotes, participates or has supervised in some way the contents of the page where the link appears, and does not even consent to its incursion, except express authorization.

Privacy Policy

Metalcam, S.L., provided by CIF B60604238, acts as the owner, promoter and content manager of this Web. Metalcam, S.L. informs the Users that it complies with the current data protection regulations, and in particular, with Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons for which deals with the processing of personal data and the free movement of these data and repealing Directive 95/46 / EC (General Regulation for data protection) and with the Law of the Society of Information Services and Electronic Commerce , Law 34/2002, of July 11.

By virtue of this regulation, it is reported that the data provided by the User through the forms of the web (including the Private Area), will be incorporated and treated in a treatment duly registered in the RGAEPD of which is responsible Metalcam, S.L., in order to attend to the relationship established between the parties and protected by regulations, especially in the field of Occupational Hazard Prevention and the rest of the related legislation. The data are confidential and their use is in accordance with the laws legally established at any given time. If you wish you can access, rectify, cancel and oppose the processing of this information by writing to C/ Berruguete, 86, 1º - 1ª, 08035, BARCELONA. For more information about our Privacy Policy, please go to the following link Privacy Policy.

Information on the use of cookies

In this website you can use cookies on some pages. The purpose of these cookies is to improve the service they offer to their customers and our visitors. If you want to know more about the use of cookies by Metalcam, S.L. click here.

Resign and limitation of responsability

Metalcam, S.L. informs that at all times it implements the appropriate security measures in order to present certain and updated information and services to the users of the web; however, the right of rectification is reserved for those aspects that, eventually and fortuitously, may result in incorrections, disaggregations or errors.

Metalcam, S.L. has obtained the information and materials included on the web of sources considered as reliable, but although the corresponding measures have been taken to ensure that the information contained is correct, it does not guarantee that it is accurate or up to date.

It also warns that the contents of this website have two purposes, an informative purpose regarding the quality, location, services and rates and another one of sale of services, as provided in this legal notice and the rest Legal texts on this website.

Indications on technical aspects

Metalcam,. S.L. declines any responsibility in case there are interruptions or a malfunction of the services or contents offered on the Internet, regardless of its cause. However, CIMATECH, S.L. is not liable for network crashes, loss of information as a result of these falls, temporary suspensions of the electrical flow or any other indirect damage that may be caused to Users for reasons beyond the control of Metalcam, S.L.

Metalcam,. S.L. does not declare or guarantee that the services or contents are uninterrupted or that they are free of errors, that the defects are corrected, or that the service or the server that makes it available is free of viruses or other harmful components, notwithstanding that CIMATECH, S.L. does his best to avoid these types of incidents. Should the User take certain decisions or carry out actions based on the information included in any of the websites, it is recommended to check the information received from other sources.

Industrial and intellectual property

The contents provided by Metalcam, S.L. as well as the contents that are downloaded to the network through its web pages, constitute a work in the sense of the intellectual property legislation for which they are protected by applicable international laws and conventions.

Any form of reproduction, distribution, public communication, transformation, making available and, in general, any other act of public exploitation referred to in the Web pages as well as to its contents and information, without the express and previous consent, is prohibited written by Metalcam, S.L.

Consequently, all the contents that are displayed on the different websites and, in particular, designs, texts, graphics, logos, icons, buttons, software, commercial names, trademarks, industrial drawings or any other sign susceptible to industrial and commercial use are subject to intellectual and industrial property rights of Metalcam, S.L. or of third parties owning them that have duly authorized their inclusion in the different websites.

The contents, images, forms, opinions, indexes and the rest of the formal expressions that are part of the Web pages, as well as the software necessary for the operation and visualization of the same, are nevertheless a work in the sense of Copyright. And they are, therefore, protected by international conventions and national laws on Intellectual Property that are applicable. Failure to comply with what is indicated implies the commission of serious unlawful acts and their sanction for civil and criminal legislation.

It is prohibited any act by virtue of which Users of the services or contents may exploit or be used commercially, directly or indirectly, in whole or in part, of any of the contents, images, forms, indexes and the rest of formal expressions which are part of the web pages without prior written permission of Metalcam, S.L.

Specifically, and without exhaustive character, acts of reproduction, distribution, display, transmission, retransmission, broadcast in any form, physical or logical storage (for example, hard disks or hard drives), digitalization or postage are prohibited available from databases other than those belonging to those authorized by Metalcam, S.L. as well as its translation, adaptation, arrangement or any other transformation of these opinions, images, forms, indexes and the rest of the formal expressions that are made available to the Users through the services or contents, while these acts are subject to the applicable legislation in the matter of Intellectual Property, industrial or of protection of the image.

Metalcam, S.L. it is free to limit access to the Web pages, and to the products and / or services offered therein, as well as the subsequent publication of the opinions, observations, images or comments that Users may send to you via email.

Metalcam, S.L. in this sense, it may establish, if it considers it appropriate, notwithstanding the sole and exclusive responsibility of the Users, the necessary filters in order to prevent their Web pages from being able to access the content network or Opinions, considered racist, xenophobic, discriminatory, pornographic, defamatory, or in any way, encourage violence or the dissemination of clearly illicit or harmful content.

Those Users who send to the Websites of Metalcam, S.L. to your department of suggestions, observations, opinions or comments by means of the electronic mail service, with the exception that they express in a certain and unmistakable way the opposite, in cases in which, due to the nature of the services or contents that are possible, understand that they authorize Metalcam, S.L. for reproduction, distribution, display, transmission, retransmission, broadcast in any format, storage in physical or logical supports (for example, hard disks or hard drives), digitalization, made available from databases belonging to CIMATECH, S.L. translation, adaptation, adjustment or any other transformation of these observations, opinions or comments, for all the time of protection of copyright that is legally provided.

However, it is understood that this authorization is made for free and that by the mere fact of sending such observations, opinions or comments by email, the Users decline any remuneration claim by Metalcam, S.L.

In accordance with the one indicated in the previous paragraph, Metalcam, S.L. is also authorized to proceed with the modification or alteration of such observations, opinions or comments, in order to adapt them to the editorial format requirements of the Web pages, without this being possible to understand that there is absolutely any type of injury of any of the moral faculties of copyright that the Users may have on those.

Any of the technical, logical or technological resources are prohibited under which a third party can benefit, directly or indirectly, with or without profit, of each and every one of the contents, forms, indexes and the rest of the formal expressions that are part of the Web pages, or of the effort carried out Metalcam, S.L. for its operation.

In particular, any link, hyperlink, framing or similar link that can be established in the direction of the Metalcam, S.L. Web pages is prohibited without the prior, express and written consent of the CUSTOMER. Any violation of the provisions in this point will be considered as an injury to the legitimate intellectual property rights of Metalcam, S.L. on the Web pages and all the contents of the same.

Metalcam, S.L. will not assume any responsibility for consequences derived from the behaviours and actions cited above, in the same way that you will not assume any responsibility for the contents, services, products, etc. from third parties that can be accessed directly or through banners, links, hyperlinks, framing or similar links from the websites of Metalcam S.L.

Any of the technical, logical or technological resources are prohibited under which a third party can benefit, directly or indirectly, with or without profit, of each and every one of the contents, forms, indexes and the rest of the formal expressions that are part of the Web pages, or of the effort carried out by Metalcam, S.L. for its operation.

In particular, any link, hyperlink, framing or similar link that can be established in the direction of the Metalcam, S.L. Web pages is prohibited without the prior express and written consent of Metalcam, S.L. Any violation of the provisions in this point will be considered as an injury to the CUSTOMER's legitimate intellectual property rights over the Web pages and all the contents thereof.

Metalcam, S.L. will not assume any responsibility for consequences derived from the behaviours and actions cited above, in the same way that you will not assume any responsibility for the contents, services, products, etc. from third parties that can be accessed directly or through banners, links, Links, hyperlinks, framing or similar links from the websites of Metalcam, S.L.